Dell PowerVault MD3420 - Manual (Page 390)

To stop a rollback operation for the most recent snapshot image in a snapshot group that has the name
snapGroup1, you would use this command:
stop snapImage ["snapGroup1:newest"] rollback;
Stop Snapshot Virtual Disk
Description
This command stops a snapshot virtual disk operation.
Syntax
stop snapVirtualDisk ["snapVirtualDiskName"]
Parameter
Parameter Description
snapVirtualDisk The alphanumeric identifier (including - and _) of
the snapshot virtual disk that you want to stop.
Enclose the snapshot virtual disk identifier in
double quotation marks (" ") inside square brackets
([ ]).
Stop SSD Cache Performance Modeling
Description
This command stops the performance modeling operation and displays the performance modeling data
for the SSD cache. Before running this command, you must start the performance modeling operation
with the start ssdCache performanceModeling command. Optionally, you can save the data to a
file.
Syntax
stop ssdCache [ssdCacheName] performanceModeling [file="filename"]
Parameters
Parameter Description
ssdCache The alphanumeric identifier (including - and _) of
the SSD cache that you want to locate. Enclose the
identifier in square brackets ([ ]). If the SSD cache
name contains special characters or consists only
of numbers, you also must enclose the identifier in
double quotation marks (" ") inside square brackets.
file The file path and the file name to which you want
to save the performance modeling data. Enclose
the file name in double quotation marks (" "). For
390