Dell PowerVault MD3420 - Manual (Page 354)

Parameter Description
hotSpareCoverage Displays information about which virtual disks of
the storage array have hot spare coverage and
which virtual disks do not.
features Displays a list of the feature identifiers for all
enabled features in the storage array.
time Displays the current time to which both RAID
controller modules in the storage array are set.
virtualDiskDistribution Displays the current RAID controller module owner
for each virtual disk in the storage array.
summary Returns a concise list of information about the
storage array configuration.
longRunningOperations Shows the long running operations for each disk
group and each virtual disk in the storage array.
The longRunningOperation parameter returns
this information:
• Name of the disk group or virtual disk
• Long running operation
• Status
• % complete
• Time remaining
NOTE: When you save the information to a file, you can use the information as a record of your
configuration and as an aid during recovery.
Show Storage Array Auto Configure
Description
This command shows the default autoconfiguration that the storage array creates if you issue the
autoConfigure storageArray command. To determine whether the storage array can support
specific properties, enter the parameter for the properties when you issue this command. You do not,
however, need to enter any parameters for this command to return configuration information. If you do
not specify any properties, this command returns the RAID 5 candidates for each physical disk type. If
RAID 5 candidates are not available, this command returns candidates for RAID 1 or RAID 0. In order to
view the RAID 6 autoConfiguration options, you must specify the raidLevel option. When you specify
auto-configuration properties, the RAID controller modules validate that the firmware can support the
properties.
Syntax
show storageArray autoConfiguration
[physicalDiskType=(SAS)
raidLevel=(0 | 1 | 5 | 6)
diskGroupWidth=numberOfPhysicalDisks diskGroupCount=numberOfDiskGroups
virtualDisksPerGroupCount=
numberOfVirtualDisksPerGroup
hotSpareCount=numberOfHotspares
354