Dell PowerVault MD3420 - Manual (Page 153)

Clear Remote Replication Fault
Description
This command clears a remote replication "sticky" fault from one or more remote replication groups and
one or more remote replication group member virtual disks.
A remote replication group and its member virtual disks can encounter remote replication "sticky" faults,
which occur at a single point-in-time but do not impact the functionality of the replications. These type
of faults must be reviewed, but do not require any changes to the configuration.
A remote replication group and its member virtual disks can have more than one associated “sticky” fault.
This command clears all of the faults associated with the remote replication group and its member virtual
disk. However, if a remote replication group has a fault and one of its member virtual disks has a fault,
clearing the fault on the remote replication group does not clear the fault on its member virtual disk.
Syntax
clear asyncRemoteReplicationFault(all | asyncRemoteReplicationGroup ["
asyncRemoteReplicationGroupName"] |
asyncRemoteReplicationGroups ["asyncRemoteReplicationGroupName1" ...
"asyncRemoteReplicationGroupNameN"] |
virtualDisk ["virtualDiskName"] | virtualDisks ["virtualDiskName1" ...
"virtualDiskNameN"])
Parameters
Parameter Description
all Use this parameter if you want to clear all remote
replication faults from all remote replication
groups and on all remote replication group
member virtual disks.
asyncRemoteReplicationGroup The name of the remote replication group from
which you want to clear the remote replication
fault. Enclose the remote replication group name
in square brackets ([ ]). If the remote replication
group name has special characters, you also must
enclose the remote replication group name in
double quotation marks (" ").
asyncRemoteReplicationGroups The names of several remote replication groups
from which you want to clear the remote
replication fault. Enter the names of the remote
replication groups using these rules:
• Enclose all of the names in square brackets ([ ]).
• Enclose each of the names in double quotation
marks (" ").
• Separate each of the names with a space.
virtualDisk The name of the specific member virtual disk (in a
remote replication group) from which you want to
153