Dell PowerVault MD3420 - Manual (Page 247)

Rename SSD Cache
Description
This command changes the name of the SSD cache.
Syntax
set ssdCache [old_ssdCacheName] userLabel="new_ssdCacheName"
Parameters
Parameter Description
ssdCache The alphanumeric identifier (including - and _) of
the SSD cache that you want to rename. Enclose
the identifier in square brackets ([ ]). If the SSD
cache name contains special characters or consists
only of numbers, you also must enclose the
identifier in double quotation marks (" ") inside
square brackets.
userLabel The new name for the SSD cache. Enclose the
name in double quotation marks (" ").You can use
any combination of alphanumeric characters,
underscore (_), hyphen (-), and pound (#) for the
identifier. Identifiers can have a maximum of 30
characters.
Repair Virtual Disk Consistency
Description
This command repairs the consistency errors on a virtual disk.
Syntax
repair virtualDisk [virtualDiskName] consistency
consistencyErrorFile="filename"
[verbose=(TRUE | FALSE)]
Parameters
Parameter Description
virtualDisk Name of the specific virtual disk for which to repair
consistency. You must put brackets ([ ]) around the
virtual disk name. If the virtual disk name has
247