Welch Allyn Connex Integrated Wall System - User Manual - Manual (Page 108)

4. Remove all instrument heads, detach all accessible cords and cables, and unplug the power
cord from the outlet.
5. Remove the cover by loosening the captive retention screws.
6. If USB accessories are connected, loosen the two screws on the cable retention clamp and
remove it, then disconnect all USB cables.
7. If the wall system is configured with SpO2, disconnect the SpO2 cable and remove it from the
channel on the bottom of the wall system.
8. Remove the security screw at the bottom of the wall system.
102 Maintenance and service Welch Allyn Connex ® Integrated Wall System