Welch Allyn Connex Integrated Wall System - User Manual - Manual (Page 72)

Alarm messages Priority
SpO2 not functional. Low
Attach SpO2 sensor to monitor. Low
Replace the SpO2 sensor. Low
Set date and time. Low
Maximum number of patient records saved. Oldest record overwritten. Low
Unable to access patient information. Low
Connect temperature probe. Low
Insert correct color coded probe well. Low
Replace temperature probe. Low
Temperature not functional. Call for service. Low
Retry temperature measurement. Low
Temperature time limit exceeded. Retry temperature measurement. Low
Low battery; plug into outlet. Low
Radio not functional. Call for service. Low
Radio error. Power down and restart. Low
Unable to establish network communications. Radio out of network range. Low
Unable to establish network communications. Call for Service. Low
Radio software upgrade failed. Low
Unable to load configuration; using factory defaults. Low
Functional error. Call for service. Low
External device not recognized. Low
Incompatible Welch Allyn device. Low
USB Communication failure. Low
Low battery 30 minutes or less remaining. Low
Low SpHb signal quality. Check sensor. Low
Low SpO2 signal quality. Check sensor. Low
Low perfusion. Check sensor. Low
66 Alarms Welch Allyn Connex ® Integrated Wall System