Welch Allyn Connex Integrated Wall System - User Manual - Manual (Page 130)

• To exit the Advanced Settings and return to the Home tab, touch Exit.
Specify date and time settings
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
The General tab appears.
2. On the General tab, touch the Date / Time tab.
3. Specify settings.
Setting Action/Description
Date format Select a date format for display.
Time zone Select your time zone offset from Coordinated
Universal Time (UTC).
Automatically adjust clock for daylight saving time,
reported by host
Select this to adjust the displayed time by +/- one
hour when the connected host reports daylight
savings time.
Allow users to change date and time Select this to allow clinicians to set the date and
time from the Settings tab.
Display date and time Select this to display the date and time on the
Home tab in the Device Status area.
4. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit.
Specify advanced alarm settings
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
The General tab appears.
2. Touch the Alarms tab.
3. Specify settings.
Setting Action/Description
Allow user to disable alarms Select to allow clinicians to turn off or turn on all
alarm limits for each vital sign. The control is on
each parameter-specific tab on the Alarms tab.
Allow user to turn off general audio Select to allow clinicians to turn off all audio
notification for alarms. This control is on the Alarms
tab (on the General tab).
124 Advanced settings Welch Allyn Connex ® Integrated Wall System