Welch Allyn Connex Integrated Wall System - User Manual - Manual (Page 138)

Require patient ID to save readings Make entering a patient ID a prerequisite for saving
measurements. If they fail to enter an identifier, the
monitor prompts them when they try to save.
Search by patient ID Enable clinicians to enter a patient ID to query for
the patient's information. If clinicians scan the ID
onto the Home tab or the Summary tab, the monitor
queries the patient list and the network. Returned
patient information populates the Patient frame on
the Home tab and fields on the Summary tab.
Clear patient information on manual save Specify that the monitor clears the selected patient
after a clinician manually saves measurements
from the Home tab. Patient information clears from
the Patient frame and the Summary tab.
Note: This setting does not take effect when
intervals are in progress.
Retrieve list Enable the monitor to retrieve the patient list from
the network. When this option is selected, a
Retrieve list button replaces the Add button
on the List tab. Information from the network
populates the List tab when clinicians touch the
Retrieve list button. Since the Add button is
not available, clinicians cannot add a patient to the
patient list.
5. Do one of the following:
• To continue in the Advanced Settings, touch another tab.
• To exit the Advanced Settings and return to the Home tab, touch Exit.
Specify clinician ID settings
Clinician identification appears next to the medicine symbol in the Device Status area on the Home
tab.
1. Access the Advanced Settings.
a. Touch the Settings tab.
b. Touch the Advanced tab.
c. Enter the Advanced settings code.
d. Touch OK.
The General tab appears.
2. Touch the Data Management tab.
3. Touch the Clinician IDs tab.
4. Specify settings.
Setting Action/Description
Label Select a type of clinician identification label for
display on the Home tab: Full name,
Abbreviation, Clinician ID, or Symbol only.
Require clinician ID to save readings Make entering a clinician ID a prerequisite for
saving measurements. If they fail to enter
identification, the monitor prompts them when they
try to save measurements. Clinicians can enter
clinician identification on the Clinician tab.
Search by clinician ID Enable the monitor to query the network for
clinician information based on ID. The monitor
132 Advanced settings Welch Allyn Connex ® Integrated Wall System