Welch Allyn Connex Integrated Wall System - User Manual - Manual (Page 60)

Note You can scan a patient's barcode from the Home tab or the Summary tab. The
scanned ID appears in the Patient frame on the Home tab and in the Patient ID field
on the Summary tab.
Before you scan a barcode on the Summary tab, touch the keyboard icon in the
Patient ID field. To return to the Home tab and begin taking patient measurements,
touch OK.
Note Scanning a clinician ID while the Clinician ID pane is open places the scanned ID
into the Clinician ID section of the Device Status area. Touch OK to return to the
Home tab and to begin taking patient measurements.
Note Use the Advanced settings Data Management tab to change the appearance of the
Clinician ID if you do not want your ID to appear in the Device Status area. (This
requires the Advanced settings access code.) However, this information is still
retained in the monitor memory for recall, printing, or to send measurements
electronically to the network.
54 Using the keypad, keyboard, and barcode scanner Welch Allyn Connex ® Integrated Wall System