Welch Allyn Connex Integrated Wall System - User Manual - Manual (Page 23)

Setup
CAUTION Welch Allyn is not responsible for the integrity of any wall mounting
interface. Welch Allyn recommends that you contact your Biomedical Engineering
Department or maintenance service to ensure professional installation, safety, and
reliability of any mounting accessory.
Supplies and accessories
For a list of all approved supplies and accessories, see Approved Accessories in the Appendix.
Unpack the wall system
This procedure applies to first-time setup of the wall system.
CAUTION You must follow these instructions exactly to ensure safety and ease of
assembly.
CAUTION Do not remove any packing materials around the wall system until the
instructions tell you to do so.
1. Lift the wall system out of the box by the cardboard handles.
2. With the wall system still in its packing material, place it onto a table or flat work surface and
remove it from the plastic bag.
17