Enter manual parameters – Welch Allyn Connex Integrated Wall System - User Manual User Manual
Page 103
Enter manual parameters
Note
The Manual parameters frame enables you to enter measurements taken manually
and displays measurements taken by some accessories. You can select and
configure the parameters in Advanced settings. Only four parameters appear in the
Manual parameters frame.
CAUTION Weight scales attached to this monitor must be running on battery
power (battery type is specified in the weight scale manufacturer's directions for
use). Do not use the weight scale's external power supply.
1. From the Home tab, touch anywhere within the Manual parameters frame.
The Manual tab appears. Two examples appear below.
2. Touch the up/down arrow keys or the keypad to manually adjust height, weight, pain level,
temperature, respiration rate, or other parameters.
Directions for use
Patient monitoring 97