Welch Allyn Connex Integrated Wall System - User Manual - Manual (Page 18)

CAUTION Do not use a long press of to power down the monitor when it is
functioning normally. You will lose patient data and configuration settings.
CAUTION Never pull on the power cord when removing it from the power outlet.
When disconnecting the power cord, always grasp the attachment plug and not the
cord. Keep the cord away from liquids, heat, and sharp edges. Replace the power
cord if the strain relief or cord insulation is damaged or begins to separate from the
attachment plug.
CAUTION Use only the Welch Allyn USB client cable to connect a laptop
computer to the USB client port. Any laptop connected to the monitor must be
running on a battery, a 60601-1 compliant power supply, or a 60601-1 compliant
isolation transformer.
CAUTION If the touchscreen is not responding properly, refer to the
troubleshooting section. If the problem cannot be resolved, discontinue use of the
monitor and contact an authorized Welch Allyn service center or qualified service
personnel.
CAUTION Verify patient identity on the monitor after manual or barcode entry and
before printing or transferring patient records.
12 About warnings and cautions Welch Allyn Connex ® Integrated Wall System