Welch Allyn Connex Integrated Wall System - User Manual - Manual (Page 63)

CAUTION Verify patient identity on the monitor after manual or
barcode entry and before printing or transferring patient records.
CAUTION Always visually verify the printed patient records.
Note The icon indicates the records have been sent to the
network.
Note You can configure some profiles and settings to automatically send
measurements to the network.
Note Patient measurements older than 24 hours are automatically
deleted from the patient records list on the Review tab.
Note The date and time stamps on saved patient measurements will
adjust in response to new date and time settings.
Delete a patient from the list
1. Touch the Patients tab.
2. From the List tab, touch the patient record you want to delete.
3. Touch Delete.
At the Delete Confirmation window, touch OK to permanently delete the selected patient.
Touch Cancel to cancel the deletion.
Note Deleting a patient from the Patients List does not delete saved
records. Touch Review to see or delete saved records.
Note For monitors connected to the network, deleting a patient on the
monitor does not affect data on the network.
Modifiers
The Modifiers tab enables you to enter additional information for current measurements.
Directions for use Patient data management 57