Welch Allyn Connex Integrated Wall System - User Manual - Manual (Page 24)

3. Turn the wall system over so that back of the wall system faces up.
Insert the battery
This procedure applies to first-time setup of the wall system. Therefore, the wall system is
assumed to be shut down.
WARNING Risk of fire, explosion, and burns. Do not short-circuit, crush,
incinerate, or disassemble the battery pack.
1. Locate the battery compartment, indicated by .
2. Insert the battery. (The battery is in a pink anti-static bag in the accessory box.)
18 Setup Welch Allyn Connex ® Integrated Wall System