Welch Allyn Connex Integrated Wall System - User Manual - Manual (Page 94)

The frame provides a numeric view and a waveform view of SpO2 data. You can toggle between
views by touching the left side of the frame.
SpO2 numeric view
The numeric view indicates the SpO2 saturation percentage and the pulse amplitude. Features of
this view differ based on the type of sensor enabled and the profile selected.
Nellcor sensor
Monitor profile Spot Check and Triage profiles
Masimo sensor
Monitor profile Spot Check and Triage profiles
Pulse amplitude
The pulse amplitude bar indicates the pulse beat and shows the relative pulse strength. More bars
illuminate as the detected pulse gets stronger.
Response Mode Control
The Response Mode Control allows you to set the SpO2 measurement time to either Normal or
Fast.
Perfusion index
Perfusion Index (PI) is an SpO2 feature available only with Masimo-equipped monitors.
88 Patient monitoring Welch Allyn Connex ® Integrated Wall System