KEYENCE IG Series - Manual (Page 144)

6-5 Monitor tab
6-22
6
IG Config
u
ra
tion Softw
a
re (
IG-
H1)
IG-E
Data output
When the [Data output] button is clicked while updating the waveform is stopped, the [Data
output] dialog box appears.
When the [Save] button is clicked, four files of "Configuration (CSV form)", "Received
waveform data (CSV form)", "Data of binarization level (CSV form)" and "Monitor image
(BMP form)" can be saved to the designated location.
Click the [Close] button after the files are saved.
Item Description
Save to
Enter directly or click the [Browse] button to specify the destination
to save.
Save file name
The file name is made automatically when the [Create the file name]
is clicked.
When the checkmark for [Add date and time to the file name] is
removed, the date and time are not added to the file name
automatically created.
When the [Clear the file name] button is clicked, the file name
created automatically is erased.
If the checkmarks before each file are removed, the data is not
saved.
File names can be entered directly.
Configuration
(CSV form) The configurations of the sensor amplifier being monitored are all
saved in the CSV file format.
Received
waveform data
(CSV form)
The light-receiving amount of each pixel of CCD being monitored is
saved in the CSV file format.
Data of binarization
level
(CSV form)
The binarization level of each pixel of CCD being monitored is saved
in the CSV file format.
Monitor image
(BMP form)
Images of the waveform display are saved in the Bitmap format.