KEYENCE IG Series - Manual (Page 90)

4-2 Basic Settings and Advanced Settings
4-32
4
Setting V
a
ri
o
us
F
u
nct
ion
s
IG-E
The analog output scaling for the judgment value (P.V.) is set.
If the setting not to output the analog output is set, this screen is skipped.
"3-1 Operation When the Power is Turned on for the First Time" (page 3-2)
"3-5 Initial Reset (Initialize)" (page 3-10)
Upper limit setting screen and lower limit setting screen
When the free range is set, the display goes to the upper limit setting screen and lower limit
setting screen. (When the default is set, these two screens are skipped.)
Press
S / T button on each setting screen to specify the upper limit and the lower limit.
10. Analog output scaling
Analog output Description
Default
value
Default setting
Scaling is not performed. c
Free range Scaling is performed. The analog output range can be
changed by specifying the upper limit and lower limit of
the judgment value (P.V.).
Example 1: Lower limit
Upper limit
(Analog output 1 to 5 V)
Example 2: Lower limit
! Upper limit
(Analog output 1 to 5 V)
Reference • If Upper limit = Lower limit is set, the analog output is output as below.
Judgment value (P.V.)
d Upper limit: Analog output lower limit (When 1-5 V o 1 V)
Judgment value (P.V.)
! Upper limit: Analog output upper limit (When 1-5 V o 5 V)
• When "Pin interval measurement mode" or "Pin diameter measurement
mode" is set for "1. Measurement mode" (page 4-8), the analog output is
fixed to the output lower limit.
Lower limit Upper limit
5
1
Judgment value
(P.V.)
(V) (V)
5
1
Lower limit Upper limit
Judgment value
(P.V.)
Item Setting range Default value
Upper limit -99.999 to 99.999 10.000
Lower limit -99.999 to 99.999 0.000
(TGG
LASER
BANK 0
1
2
3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
#P)
GO
HOLD CALC CHECK

LASER
BANK 0
1
2
3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
#P* HOLD CALC CHECK

LASER
BANK 0
1
2
3
HI
GO
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
#P. HOLD CALC CHECK
F'(.V
LASER
BANK 0
1
2
3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT
 KP
GO
HOLD CALC CHECK
10. Analog Output
Scaling
Upper limit
specifying screen Lower limit
specifying screen
[MODE]
or
X
[MODE]
or
X
11. External Input
[MODE]
or
X