KEYENCE IG Series - Manual (Page 78)

4-2 Basic Settings and Advanced Settings
4-20
4
Setting V
a
ri
o
us
F
u
nct
ion
s
IG-E
The holding method is set for the judgment value (P.V.).
Functions other than "Auto peak hold" and "Auto bottom hold" are held using the external
input (timing input).
5. Hold function
Note When functions other than "Auto peak hold" and "Auto bottom hold"
are set, assign the external input 3 (pink/purple wire) to the timing input.
"11. External input" (page 4-33)
Reference • While the judgment value (P.V.) is held, the hold indicator on the sensor
amplifier lights up.
Hold Function Description
Default
value
Sample hold When the timing input is turned ON, the judgment value
(P.V.) is held.
"Sample hold" (page 4-21)
c
Peak hold The maximum value of the specified period (sampling
period) is held as a judgment value (P.V.).
"Peak hold" (page 4-22)
Bottom hold The minimum value of the specified period (sampling
period) is held as a judgment value (P.V.).
"Bottom hold" (page 4-23)
Peak-to-peak
hold The difference between the maximum value and
minimum value of the specified period (sampling period)
is held as a judgment value (P.V.).
"Peak-to-peak hold" (page 4-24)
Auto peak
hold According to the specified trigger level, the maximum
value sampled is held as a judgment value (P.V.).
The external input is not required.
"Auto peak hold" (page 4-25)
Auto bottom
hold According to the specified trigger level, the minimum
value sampled is held as a judgment value (P.V.).
The external input is not required.
"Auto bottom hold" (page 4-26)

LASER
BANK 0
1
2
3
HI
LO
R.V. ANALOG
HI SHIFT
ZERO SHIFT
TIMING LO
ALIGNMENT

[HOLD] ON
GO
HOLD CALC CHECK