Saving the standard waveform function, Saving zero shift value function – KEYENCE IG Series User Manual

Page 97

Advertising

4-2 Basic Settings and Advanced Settings

4-39

IG-E

Setting V

us
F

nct
ion
s

When the standard waveform is registered (Gain adjustment) with the external input, make
the setting for nonvolatile memory (EEPROM) to save the standard waveform.
When the standard waveform is registered with the sensor amplifier button operation, it is
saved on the nonvolatile memory (EEPROM) regardless of the setting.

"3-4 Registering the Standard Waveform (Gain adjustment)" (page 3-9)

When the zero shift is performed with the external input, make the setting for the nonvolatile
memory (EEPROM) to save the shifted status.
When the zero shift is performed with the sensor amplifier button operation, it is saved on
the nonvolatile memory (EEPROM) regardless of the setting.

"3-7 Zero Shift Function (Shifting the Internal Measurement Value (R.V.))" (page 3-16)

12. Saving the standard waveform function

Note

If the data is written in the nonvolatile memory (EEPROM) over 500
thousand times, the error message is displayed and the setting may not
be saved any more. (The measurement operation is possible.)

"Error displays and corrective actions" (page A-4)

When saving on the nonvolatile memory (EEPROM) is not necessary
such as when you frequently register the standard waveform with PLC,
setting OFF is recommended.

Saving the Standard Waveform

Description

Default value

OFF

Not save on the nonvolatile memory (EEPROM)

Save on the nonvolatile memory (EEPROM)

13. Saving zero shift value function

Note

If the data is written in the nonvolatile memory (EEPROM) over 1 million
times, the error message is displayed and the setting may not be saved
any more. (The measurement operation is possible.)