KEYENCE LS-7600 - Manual (Page 121)

5-59
Chapter 5 Function Settings
5
3
Press the [Up or Down] key and
select the minimum display unit.
4
Press the [ENT] key.
The input detail is entered and the
cursor returns to D-RES.
LIMITS DEV
T-MODE ASYNC
D-UNIT mm
D-RES 0.00005
C-OUT SUB
GRAPH-T
OUT1 1m
OUT2 1m
STATS
OUT1 OFF
OUT2 OFF
GROUP OFF
APP-MODE OFF
I/O Mode
The mode of the I/O connector on the rear panel of the controller can be changed.
Setting Range
Select the connector mode from the following ones.
• SUB: SUB mode
• BCD: BCD mode
Tips For the operation of the connectors in each mode, refer to Connector I/O on
page 7-4.
1
Press the [Up or Down] key and move the cursor to C-OUT.
2
Press the [ENT] key.
The cursor moves to the setting item.
3
Press the [Up or Down] key and
select C-OUT.
The following table lists available setting
items with corresponding displays on the
LCD monitor
SUB mode SUB
Setting LCD monitor
BCD mode BCD
4
Press the [ENT] key.
The input item is entered and the cursor
moves to C-OUT.
LIMITS DEV
T-MODE ASYNC
D-UNIT mm
D-RES 0.00005
C-OUT SUB
GRAPH-T
OUT1 1m
OUT2 1m
STATS
OUT1 OFF
OUT2 OFF
GROUP OFF
APP-MODE OFF