KEYENCE LS-7600 - Manual (Page 126)

5-64
Chapter 5 Function Settings
5
2
Press the [ENT] key.
The cursor moves to the setting item.
LIMITS DEV
T-MODE ASYNC
D-UNIT mm
D-RES 0.00005
C-OUT SUB
GRAPH-T
OUT1 1m
OUT2 1m
STATS
OUT1 OFF
OUT2 OFF
GROUP OFF
APP-MODE OFF
LIMITS DEV
T-MODE ASYNC
D-UNIT mm
D-RES 0.00005
C-OUT SUB
GRAPH-T
OUT1 1m
OUT2 1m
STATS
OUT1 OFF
OUT2 OFF
GROUP OFF
APP-MODE OFF
3
Press the [Up or Down] key and
select the set value.
If the [ENT] key (Up or down key) is
pressed continuously, the set value will
automatically increase or decrease.
4
Press the [ENT] key.
The input item is entered and the cursor
moves to GROUP.
3
Press the [Up or Down] key and
select the set value.
The following table lists available set-
tings items with corresponding displays
on the LCD monitor.
Standard measurement OFF
Setting LCD monitor
External diameter measurement of
workpieces with odd-numbered teeth DRILL
Measurement of outer diameter
and width for large objects with
two measuring heads DUAL
4
Press the [ENT] key.
The input item is entered and the cursor
returns to APP-MODE.
Application Function
The application function is use to measure the external diameter measurement of work
pieces with odd-numbered teeth (DRILL) or to measure the outer diameter or width of large
objects with two measuring heads (DUAL). Refer to the Application Functions on pages 5-
68 and 5-70 for details.
1
Press the [Up or Down] key and move the cursor to APP-MODE.
2
Press the [ENT] key.
The cursor moves to the setting item.