KEYENCE LS-7600 - Manual (Page 48)

3-8
3
Chapter 3 Easy Setting Guide
Measurement of Pitch
The single pitch of connectors pins or IC pins is measured by the LS-7600 Series. Further-
more, multiple pitch of pins is measured with the program function or RS-232C interface
used.
■
Set Values
Set item
Calibration
Tolerance setting
Area setting
Output
setting
AREA
Operation
Averaging
RUN mode
Offset
Set value
AREA 1
Head 1 SEG
(+2P, +4P)
Make settings if required.
A1: +1
A2: 0
Select the value according to the line speed.
Sample hold 1/2
No settings are required.
Head 1 SEG
(+4P, +6P)
A1: 0
A2: +1
Select the value according to the line speed.
Sample hold 1/2
No settings are required.
Set the upper and lower limit values.
AREA 2
OUT 1 OUT 2
■
Reference
RS-232C (Page 8-1)
Area Settings (Page 5-9)
Calibration Settings (Page 5-22)
Output Settings (Page 5-29)
Tolerance Settings (Page 5-49)
The center pitches of the two portions
are measured at a time.