KEYENCE LS-7600 - Manual (Page 22)

1-8
1
Chapter 1 Getting Started
Functions and Nomenclature
The following section provides information on the functions and nomenclature of the
controller and measuring head.
Controller
Power Supply Indicator
The indicator is lit when power
is supplied to the LCD monitor.
LCD Monitor
Modular Connector
Used to connect the remote
control console connector
or RS-232C cable
connector.
(Page 8-2, Section 8
RS-232C)
Connector I/O
Used for signal I/O
(Page 7-2, Section 7 I/O Terminals)
LCD Monitor Adjustment
Trimmer
Used to make color, hue, or
brightness adjustments to the
LCD monitor. (Page 1-20)
Terminal Block
Used for signal I/O
(Page 7-2, Section 7 I/O
Terminals)
Extension Connector
Connect the cable
between the controller
and the measuring head.
Power Input Terminals (24 VDC)
Provide 24 VDC power supply.
DC IN
Connect the LS-S11 AC Power Supply
Cable.
Controller (Rear Side)
Controller (Bottom)
Control Panel
(Page 2-2, Section 2 Basic Operation of LS-7600 Series)
Camera Connector
Connect the camera cable.
Video Output
Connector
Connect the monitor
cable.