KEYENCE LS-7600 - Manual (Page 56)

4-6
Chapter 4 Operation Control
4
2
Press the [SCREEN] key for 2 s to return to the measured value display
screen.
NG RECORD Display
NG RECORD
NO TIME RESULT
1 8.61150 HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
HI
01/01/01
12:00:00
P – 00
OUT1
2 8.60895 01/01/01
11:55:00
P – 00
OUT1
3 1.50140 01/01/01
11:43:00
P – 00
OUT2
4 1.49645 01/01/01
11:39:00
P – 00
OUT2
5 1.49610 01/01/01
11:15:00
P – 00
OUT2
6 1.49630 01/01/01
10:53:00
P – 00
OUT2
7 8.60435 01/01/01
10:47:00
P – 00
OUT1
8 8.60460 01/01/01
10:32:00
P – 00
OUT1
9 1.50270 01/01/01
10:32:00
P – 00
OUT2
10 1.50160 01/01/01
09:37:00
P – 00
OUT2
The NG RECORD can be printed. The NG RECORD will not be lost after the
LS-7600 Series is turned off.
Note: • All NG RECORD data will be lost if the programs are all cleared. Refer to
Initialization of All Program Settings on page 6-6. If the present number of
NG RECORD data items held by the LS-7600 Series is 20, the oldest one
will be deleted when the next NG RECORD data item is input.
• The display is not automatically updated. To update the display, return to the
measured value display and then redisplay the information.
NG Data
The following NG data items will be put on record.
Normal
Automatic peak hold
Automatic bottom hold
Automatic peak-to-peak hold
Peak hold
Bottom hold
Peak-to-peak hold
Average hold
Sample hold 1
Sample hold 2
Self-timing hold
A measured value held by TIMING input, the hold key, or
RS-232C will be put on NG record if the measured value is
not good (NG). The value will not be put on record unless it
is held.
A measured value held by TIMING input, the hold key, or
RS-232C will be put on NG record if the measured value is
not good (NG).
A value that has been measured and entered will be put on
NG record if the value is not good (NG).
RUN mode NG Data Item
Tips