KEYENCE LS-7600 - Manual (Page 92)

5-30
Chapter 5 Function Settings
5
Making Output Settings for OUT1
(1) Press the [ENT] key.
Making Output Settings for OUT2
(1) Press the [Down] key to move the
cursor frame to OUT2.
(2) Press the [ENT] key.
OUT1
CALC +1A1 +0A2
AVE 512
MEA-MODE NORMAL
OFFSET 0.00000
OUT2
CALC +0A1 +1A2
AVE 512
MEA-MODE NORMAL
OFFSET 0.00000
01/02/18
17:50:42
CAM1
PROG
P – 00
LIMIT
AREA
OUTPUT
CALIB
OPTION
A1 2
A2 2
Area Calculation
The measured values from the two memory areas are used for calculation processing.
Setting Range
Select the coefficient from the following.
+1, +1/2, 0, –1/2, and –1
■ Examples of Area Calculation
By multiplying the measured values with the coefficient selected, automatic size calcu-
lation will be obtained. Set the coefficient as explained below to obtain the desired
output value.
No Calculation is Performed
A1
A2
+1
0
Obtaining the Outer Diameter from Two
Measuring Heads
Set AREA1 for DIA in measuring head 1
and AREA2 for DIA in measuring head 2.
A1
A2
+1/2
+1/2