KEYENCE LS-7600 - Manual (Page 76)

5-14
Chapter 5 Function Settings
5
■
Setting Procedure
1
Select HEAD and press the [ENT] key.
The cursor moves to the setting item.
2
Press the [Up or Down] key and select
AREA1
HEAD 1
AREA DIA
A-DISP ON
FOCUS 5
A-TEST OFF
the measuring head number.
3
Press the [ENT] key.
The cursor moves to HEAD.
4
Select AREA and press the [ENT] key.
AREA1
HEAD 1
AREA DIA
A-DISP ON
FOCUS 5
A-TEST OFF
The cursor moves to the setting item.
5
Press the [Up or Down] key and select
AREA1
HEAD 1
AREA DIA
A-DISP ON
FOCUS 5
A-TEST OFF
AREA1
HEAD 1
AREA DIA
A-DISP ON
FOCUS 5
A-TEST OFF
the measuring method.
The following items are displayed for
setting.
LCD monitor Setting item
DIA
T-EDGE
DIA (Diameter)
T-EDGE (Top edge)
B-EDGE B-EDGE (Bottom edge)
+2E~+3E SEG (Segment)
Tips The area cursor on the target viewer moves according to the setting item.