KEYENCE LS-7600 - Manual (Page 31)

1-17
1
Chapter 1 Getting Started
CAUTION
Tips
Connection
Connect the measuring head, controller, remote control console, and power supply with the
cables.
Do not supply power to the controller while connecting the
cables. If the AC power supply stand is used, turn off the AC
power supply stand while connecting the cables. The measur-
ing head, controller, or peripheral devices may be damaged if
power is supplied while connecting the cables.
Make the following five connections.
• Transmitter and receiver: Connect the cables from the transmitter and receiver respec-
tively.
• Measuring head and controller: Connect the cable between the controller and measuring
head.
• Camera unit and controller: Connect the camera cable.
• Remote control console and controller: Connect the remote control console.
• Power supply cable: Supply 24 VDC to the controller directly or through the AC power
supply stand.
Remote control
console
Camera cable
(LS-C3AM/LS-C10AM
/LS-C30AM)
Power supply cable to the AC
power supply stand
Cable between controller and measuring
head (LS-C3A/LS-C10A/LS-C30A)
Up to two cables are connectable,
provided that the total length of the
cables does not exceed 40 m.
Cable between transmitter and receiver
(OP-42182/OP-42183) (Optional)
KZ-U3 24-VDC Power
Supply (Optional)
LS-7601
Measuring head
(LS-7010M/LS-7030M/LS-7070M)
Measuring head
(LS-7010M/LS-7030M/LS-7070M)
Up to two cables are
connectable, provided that
the total length of the cables
does not exceed 40 m.
The bottom of the AC power
supply stand has legs. Erect the
legs and use the AC power
supply stand if required.