Abort – Measurement Computing Analyzer488 User Manual
Page 111
Advertising
Section 4
Serial Controller
4.17
ABORT
The ABORT command causes the Interface Clear (IFC) bus management line to
be asserted for at least 500 microseconds. By asserting IFC, the Analyzer488 regains
control of the bus even if one of the devices has locked it up during a data transfer.
ABORT
forces all IEEE 488 bus device interfaces into a quiescent idle state.
This command does not have a query option.
TYPE
High Level Controller command
SYNTAX
ABORT
RESPONSE
None
MODE
High Level Controller
BUS STATES
IFC, *IFC
QUERY
None
RESPONSE
EXAMPLES
PRINT#1,"ABORT"
pulse IFC line
Advertising