Measurement Computing Analyzer488 - Manual (Page 252)

Appendix A Front Panel Key Summary
A.2
-MEMORY-
[VIEW] Toggle display between bus display mode and memory view
mode.
[ERASE] Erase record memory and reset location pointer to zero.
[REC] Enable recording.
[ZERO] Reset location pointer to zero.
[REL] Toggle addressing mode between relative addressing and absolute
addressing.
[SET REL] Set the location pointer.
-SEARCH-
[FIRST] Display the first bus event recorded.
[+TRIGGER] Search for the next trigger point.
[LAST] Display the last bus event recorded.
[-TRIGGER] Search for the previous trigger point.
[NEXT] Find the next location that matches pattern defined with [FIND]
key.
[FIND] Find the first occurrence of a selected bus event.
-TRIGGER-
[STAT] Provide status information about the last triggered bus recording.
[DISPLAY] Set the brightness of the front panel display.
[SETUP] Set up parameters of the trigger command.
[MEASURE] Display bus event performance data.
[ARM] Enable triggering.
[HEX
↔BIN] Toggle display format between hexadecimal and binary data.
-CURSOR-
[
↑]
Increment the displayed memory location or the data value placed
on the bus.
[
↓]
Decrement the displayed memory location or the data value placed
on the bus.
[
→]
Select parameter fields by moving the cursor to the right.
[
←]
Select parameter fields by moving the cursor to the left. Also
provides a backspace key for numeric entries.