Measurement Computing Analyzer488 - Manual (Page 14)

Section 1 Introduction
1.2
1.2 About This Manual
This manual describes the operation of the Analyzer488 IEEE 488 Bus Analyzer,
manufactured by IOtech, Inc. It assumes that you are familiar with using the IEEE
488 bus, using a serial terminal, using a personal computer, menus, and using a
mouse.
Section 1, Introduction, is an introduction to the Analyzer488. It includes a
description, specifications, and service information.
Section 2, Getting Started, presents a step-by-step introduction to using the
Analyzer488. It provides an overview of the three operating modes and examples of
displaying bus information, storing bus events, and analyzing bus data.
Section 3, Front Panel Operation, gives a detailed explanation of operating the
Analyzer488 from the front panel. It includes a description of all the controls and
indicators and provides examples of all the features of front panel operation.
Section 4, Serial Controller, provides a description of the Serial Controller Mode
of operation of the Analyzer488. It includes an explanation of how to use the
Analyzer488 as a serial controller and a detailed description of all the commands.
Section 5, Analyst488 PC Software, shows how to use the Analyzer488 with the
Analyst488 PC software running on an IBM PC computer. It includes a description of
all menus, screens, and windows and gives detailed examples of all the Analyst488
software features.
Section 6, Instrument Simulator, shows how the use the Analyzer488 as an
instrument simulator. It gives a detailed explanation of all the commands that are
available when the Analyzer488 is in this mode of operation.
Appendices A to H provide reference material, including an IEEE primer, cable
and pinout details, command summaries, a sample program listing, error messages,
and a glossary of terms.