Measurement Computing Analyzer488 - Manual (Page 7)

Table of Contents
4.5 Using the Analyzer488 with a PC 4.2
4.6 Using the Analyzer488 with a Terminal 4.3
4.7 Serial Controller Commands 4.4
4.7.1 System Commands 4.4
4.7.2 Record Commands 4.5
4.7.3 High Level Controller Commands 4.5
4.7.4 Low Level Controller Commands 4.5
4.8 Bus State Format 4.5
4.9 Record Memory Format 4.9
4.10 Memory Usage 4.6
4.11 Command Descriptions 4.7
4.11.1 Type 4.7
4.11.2 Syntax 4.7
4.11.2.1 Bus Addressing 4.9
4.11.2.2 Record Memory Addressing 4.10
4.11.2.3 Character Count 4.10
4.11.2.4 ASCII Characters 4.10
4.11.2.5 ASCII Character Strings 4.11
4.11.2.6 Terminators 4.11
4.11.2.7 Bus Management and Data Lines 4.11
4.11.2.8 Event Conditions 4.12
4.11.3 Response 4.12
4.11.4 Remarks 4.12
4.11.5 Mode 4.12
4.11.6 Bus States 4.13
4.11.7 Query Response 4.14
4.11.8 Examples 4.14
4.12 Command Descriptions 4.14
@ 4.15
@@ 4.16
ABORT 4.17
ADDRESS 4.18
ARM 4.19
ASSERT 4.21
CLEAR 4.23
CONTROLLER 4.24
DISARM 4.26
DISPLAY 4.27
DUMP 4.28
ENTER 4.30