Measurement Computing Analyzer488 - Manual (Page 84)

Section 3 Front Panel Operation
3.38
Match? XXXXXXXXXXXXX
(bin)
Requests the bus pattern for match. Bus data and signal line patterns
are specified as true (
1 ), false ( 0 ) or don't care ( X ). When displaying
hexadecimal data, changing the hexadecimal data byte automatically
changes the corresponding bus message. Use the [
→] and [←]
cursor keys to move between input fields. Use the [
↑] and [↓] cursor
keys to set values. Pressing [
↑] at the
NUL bus message selects a
bus error ( ERROR ). Accept entry with [ENTER] and [EXIT] or
cancel with [ESC].
# of Matches? 00001
Requests the number of times the bus pattern should match before
starting the trigger delay. Number of matches can be from 1 to
65,535. Accept entry with [ENTER] and [EXIT] or cancel with
[ESC]
.
Trig Delay? 0000000
Requests the number of events to delay before starting the post
count. Trig delay can be from 1 to 9,999,999. Accept entry with
[ENTER]
and [EXIT] or cancel with [ESC].
Post Count? 00000
Requests the number of events in the trigger post count. Post
count
can be from 1 to 32,767. Accept entry with [ENTER] and
[EXIT] or cancel with [ESC].
When Complete? Stop
Requests the recording action to be taken following the completion
of the post trigger count. The two choices are:
Stop or Step . Stop
allows the activity on the bus to continue at the selected handshake
speed.
Step continues recording at single-step handshake rate (use