Wavecom W74PC V8.7.0 - Manual (Page 18)

8

General Information WAVECOM Decoder W74PC, W-PCI/e, W-CODE, W-CLOUD Manual V8.7.0
Version Date Changes
-
Dedicated phase plane for MIL/STANAG modes to show the PSK signal be-
fore and after the equalizer.
-
MIL-188-110A can now be synchronized on the probe: on-going synchroni-
zation.
-
DMR has a bit-transparent output (Options -> Message Type).
-
XML RCI extension: add commands to retrieve CCC mode table.
-
XML RCI extension: classifer result message is delivered in a better struc-
ture. Details refer to XML RCI Manual.
8.5.0 15-March-2014
-
New mode MIL-188-110A-MOD.
-
New modes THROB and THROBX.
-
Significant enhancement of DMR: both slots are decoded. Full monitoring
especially of communication with a base station.
-
Bit transparent output for dPMR (Options -> Message Type).
-
XMLTestGUI.exe is released in XML RCI SDK for user to run W-CODE with-
out Wavecom GUI.
-
General improvements and bug fixes.
8.5.1 03-June-2014
-
New identity for Wavecom hardware decoders. W74PC, W-PCI and W-PCIe
appear with their own logo. W74PC, W-PCI and W-PCIe run with an in-card
license. The USB dongle license is no longer necessary.
8.6.0 03-Nov-2014
-
TETRA SNDCP output.
-
New mode CLOVER-2500.
-
INMARSAT-MINI-M now supports HSD (M4): SAT-B-C-HSD and SAT-mM-C-
HSD.
-
Enhancement of PACTOR-I: all connect frames and free signals are decod-
ed.
-
Enhancement of PACTOR-II and PACTOR-III: able to decode encrypted
connections.
8.7.0 16-May-2015
-
SAT-Aero modes: SAT-AERO-P, SAT-AERO-C, SAT-AERO-R and SAT-AERO-
T.
-
DMR revisited: two new SYNC types according to ETSI TS 102 361-1 V2.1.1
(2012-4). Protocol Tier I, II and III update according to ETSI TS.
-
Improve the “Device Selector” GUI for HW decoder. Add “License Edit” but-
ton.
-
Add “live-sound-mute” parameter (for DMR, dPMR modes etc.) into XML
RCI interface.
-
Custom input supports VITA-49 protocol.
-
General improvements and bug fixes.
Recommended WAVECOM Products and Services
W-BV BitView Tool
The highly sophisticated BitView Tool is an external off-line, stand-alone .NET application for analysis of
unknown signals.
BitView has a number of features:
 Bit manipulation tools
 Bit display tools (text, graphics)
 Simultaneous processing of multiple analysis sessions