Networking information, Data encryption – Wavecom W74PC V8.7.0 User Manual
Page 323
WAVECOM Decoder W74PC, W-PCI/e, W-CODE, W-CLOUD Manual V8.7.0
Additional Functions
313
Clicking into the name edit field
Change the name of the card
Click on the Apply Changes button. Discard Changes will discard any changes
Networking Information
The following network setup parameters for remote control are available from the Networking Infor-
mation tab:
Allow Remote Connections. Disable this box if you do not allow connections to the decoder
cards from another computer.
Data Compression. Enable or disable data compression for the data transfer to the remote com-
puter. Data compression is required if you use a slow remote connection. If your modem is al-
ready compressing the data, disable this option.
Data Encryption. Enable optional data encryption if a secure connection is required. If the con-
nection is already safe (crypto devices, VPN etc), disable this option.
TCP Port. Enter a free TCP port. If the port is already used by another application, change the
port number. If you use routers, firewalls etc. check that traffic from the selected port is trans-
ferred to the client's location. The default value for GUI connection to the WAVECOM server W-
CODE is 33243. Wavecom GUI client (local or remote) can only connect to the server if it is work-
ing on the same port.
In addition to the port number of the GUI, port numbers for the XML Remote Interface and the Server
Control Interface may be entered here.
The following table lists the TCP/IP ports of W-CODE, W-PCI, W-PCIe and W74PC.
W-CODE
W-PCI
W-PCIe
W74PC
Graphical user interface (GUI)
33243
33253
33273
33283
XML remote control interface RCI
33244
33254
33274
33284
Server control interface SCI
33245
33255
33275
33285
Important: Be aware that data encryption and compression may be CPU intensive. Disable these func-
tions if your system is slow.
Data Encryption
The WAVECOM user interface is able to communicate with the WAVECOM server application over an en-
crypted connection. The server has a built in cryptographic capability; use the WAVECOM Server Control
application to switch this option on or off.