Wavecom W74PC V8.7.0 - Manual (Page 39)

WAVECOM Decoder W74PC, W-PCI/e, W-CODE, W-CLOUD Manual V8.7.0 First start

29
To select the source use the Input Source control:
Note: On Windows Vista and later, all input sources from all sound cards are listed under the 'Input De-
vice' control, and the 'Input Source' control is not available.
Various combinations of sampling rate and bits per sample can be chosen when recording WAV files, and
the output file can be either mono or stereo. To set the WAV file recording format use the following con-
trols:
Sample Rate needs to be set to twice the required signal bandwidth. The following sample rates are sup-
ported:
Sample Rate Signal Bandwidth Remarks
8 kHz 4 kHz
11.025 kHz 5.5 kHz
16 kHz 8 kHz
22.05 kHz 11 kHz
44.1 kHz 22 kHz
48 kHz 24 kHz Recommended
96 kHz 48 kHz
192 kHz 96 kHz
Note: Not all sound cards will support all of these sample rates. For further details see the documentation
provided by your host sound card manufacturer.
Bits per Sample can be set to either 8 bits or 16 bits depending on the required dynamic range:
Bits per Sample Dynamic Range
8 bits 48 dB
16 bits 96 dB
Audio can be recorded in stereo or mono. When recording in mono, either the left or right channel can be
recorded. The Channel control provides the following options:
Channels Recording Source
AF Left Records left channel only
AF Right Records right channel only
IQ (Left & Right) Records both channels
On sound cards that are not capable of stereo sound, only one option (namely 'AF') is available.