Wavecom W74PC V8.7.0 - Manual (Page 326)

316

Additional Functions WAVECOM Decoder W74PC, W-PCI/e, W-CODE, W-CLOUD Manual V8.7.0
Exception:
The computer name and the card number will be overwritten if you run the Alarm Monitor directly from
the WAVECOM decoder GUI. Alarm Monitor also inherits its settings from the decoder.
Setup: If you plan to connect to a device installed in a PC other than the one on which you have installed
Alarm Monitor, Server Control or the WAVECOM software must be running on that PC.
Connect the Alarm Monitor to any WAVECOM devices located in any computer on your local network. If
you do not connect to a card located in your local PC, enter the name of the remote computer that con-
tains at least one WAVECOM card. Select the card number.
Note: Connecting to a decoder card on the network may take up to two minutes. The wait cursor will ap-
pear while the connection is being made.
Configuration – Font size
The Alarm Monitor will display the text lines with the WAVECOM Unicode font in the selected size.
Use Color: to display the background with the selected color.
Options
The Save menu is used to configure the file saving options.
Text
If checked, all text data will be saved to a file.
Alarm
If checked, text that contains the specified alarm strings will be saved to a file.
Change time
This specifies the time when Alarm Monitor will create new data files for the information being written to
files. When new files are created, data will not be lost during the changeover. The old files are closed and
stored for later use.
Settings
The Settings menu is used to configure the file and folder names, alarm strings and SMS settings.
Settings – Folder
The settings in this dialog box help you archiving the different files. The file name will consist of the date,
computer name, card number and frequency of the transmission.