Output – Wavecom W74PC V8.7.0 User Manual

Page 319

Advertising
background image

WAVECOM Decoder W74PC, W-PCI/e, W-CODE, W-CLOUD Manual V8.7.0

Modem and FAX Modes

309

If a fax sample stream is missing the initial handshake and thus the fax parameters are absent, the signal
may still be decoded by manually entering the value of the missing parameters.

For data signals without the initial handshake, the user may force the modulation type in the case of
V.22, V.26, V.27, V.29 and V.32 signals with a bit rate lower than 4800 bps.

Output

Fax images and data are output to the display and may also be saved to disk. The following formats are
supported:

Fax

Images are saved in bitmap or compressed JPEG formats

Handshake information is saved as a text file

Data

Transparent data

Data in asynchronous character format (no LAP protocol or data compression)

Decoded HDLC frames (no LAP protocol recognized)

Decoded V.42, V.42bis, MNP 4 and MNP 5 data

Advertising