Panasonic Lumix GX8 - Manual (Page 282)

10. Playing Back and Editing Images
282
• The number of prints can be set from 0 to 999.
• Depending on the printer, the date print settings of the printer may take precedence so check if
this is the case.
• It may not be possible to use the print settings with other equipment. In this case, cancel all the
settings, and reset the settings.
• When you set pictures in a group to [Print Set], the number of pictures added to [Print Set] and
the total number of pictures to be printed are displayed on the [Print Set] icon of the group’s top
picture.
Not available in these cases:
• This function is not available in the following cases:
– Motion pictures
– 4K burst files
– Pictures taken with [ ]
– File that does not comply with the DCF standard
You can set protection for pictures you do not want to delete by mistake.
1
Select the menu. (P63)
2
Select the picture. (P261)
• Exit the menu after it is set.
∫ Canceling all the [Protect] settings
Select the menu. (P63)
• Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
• The [Protect] feature is only designed to work with this camera.
• Even if you protect pictures on a card, they will be deleted if the card is formatted.
• When you set pictures in a group to [Protect], the number of pictures with the [Protect] setting is
displayed on the [Protect] icon of the group’s top picture.
[Protect]
> [Playback] > [Protect] > [Single]/[Multi]
> [Playback] > [Protect] > [Cancel]
Even if you do not protect pictures on a card, they cannot be deleted when the
card’s Write-Protect switch is set to [LOCK].
MENU
MENU