Panasonic Lumix GX8 - Manual (Page 54)

2. Getting Started/Basic Operations
54
• The monitor screen is switched as shown below. (Examples for the monitor style [ ])
¢1 Histograms are displayed when the [Histogram] of the [Custom] menu is set to [ON].
It is also possible to display the Exposure meter by setting the [Expo.Meter] of the [Custom]
menu to [ON].
(P95)
¢2 It is displayed when the [Monitor Info. Disp.] of the [Custom] menu is set to [ON].
Settings can be adjusted directly by touching each of the items displayed on the screen.
• If you assign [LVF/Monitor Disp. Style] to [Fn Button Set] (P70) in the [Custom] menu, each
time you press the assigned function button, you can change the display style of the monitor or
viewfinder ([
]/[ ]), whichever is currently in use.
• If no operation is performed, the information on the screen will gradually become darker after
approximately 10 seconds has passed, and will no longer be displayed after approximately 1
minute has passed.
Pressing the [DISP.] button or touching the monitor will make the display reappear.
This operation is to prevent screen burn-in and is not a malfunction.
With
information ¢1
Without
information
With information
(tilt sensor
display) ¢1
Without
information (tilt
sensor display)
Turned off
On-monitor
recording
information ¢2
60p
98 98 98
AFS AFS L
4:3
0
60p
98 98 98
AFS AFS L
4:3
0
AFS AFS
98 AWB
0 0
0
Fn
ISO
AUTO
Wi-Fi
L
4:3