Panasonic Lumix GX8 - Manual (Page 364)

13. Others
364
[Picture is displayed for 16:9 TV]/[Picture is displayed for 4:3 TV]
•
Select [TV Aspect] in the [Setup] menu if you want to change the TV aspect. (P80)
• This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer.
(P341 , 344)
[Editing operation cannot proceed as another operation is taking place.]
When there are too many image files, the currently retrieving information icon ([
]
or [ ]) may be displayed on the playback screen for a long period of time. During
this time, use of some items in the [Playback] menu is not possible.
You cannot create pictures from motion pictures or play back 4K burst files recorded with
the 4K Photo function. If you have been playing back a motion picture, stop the playback
and wait for while until the message disappears.
•
If this unit is turned off while acquiring information, only the pictures that have already
acquired the information are saved as a group.
When you switch on again, the information retrieval will restart from the same point.
[This battery cannot be used]
•
Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or Panasonic.
• If the battery terminal is dirty, clean it and remove any objects.
[Please make sure to turn on the power of external microphone.]
•
When attaching the stereo microphone (DMW-MS1: optional), check the battery status and
make sure this unit is on before use.
(P353)
[Failed to connect wireless access point]/[Connection failed]/[No destination
found]
•
Check following regarding the wireless access point.
– The wireless access point information set on this unit is wrong.
Check the authentication type, encryption type, and encryption key.
(P326)
– Power of the wireless access point is not turned on.
– Setting of the wireless access point is not supported by this unit.
• Check the network setting of the destination.
• Radio waves from other devices may block the connection to a wireless access point.
Check other devices that are connected to the wireless access point and devices that use the
2.4 GHz band.