Dc coupler cover, P355) – Panasonic Lumix GX8 User Manual

Page 355

Advertising
background image

355

13. Others

By connecting the AC adaptor (optional), and then plugging them into an electrical socket,
you can connect this unit to a PC or printer and use without worrying about the capacity of
the battery.
To use the AC adaptor, a DC coupler (optional) is required.

Always use a genuine Panasonic AC adaptor (optional).

When using an AC adaptor, use the AC cable supplied with the AC adaptor.

When the DC coupler is being mounted, the DC coupler cover opens, so the structure ceases
to be dust-proof and splash-proof. Be careful not to allow sand, dust and water etc. to adhere to
or enter the structure. After use, check that there is no foreign matter attached to the coupler
cover, and close it firmly.

Also read the operating instructions for the AC adaptor and DC coupler.

The MC protector is a transparent filter which affects neither the colors nor the amount of
light, so it can always be used to protect the camera’s lens.
The ND filter reduces the amount of light to approximately 1/8th (equal to adjusting the
aperture value 3 increments) without affecting the color balance.
PL filter will suppress the reflected light from a metal or non spherical surfaces (flat
non-metallic surfaces, water vapour or invisible particles in the air), making it possible to
take a picture with enhanced contrast.

Do not attach multiple filters at the same time.

You can attach the lens cap or the lens hood when the filter is attached.

Refer to the instructions for each filter for details.

AC adaptor (optional)/DC coupler (optional)

Filters (optional)

Advertising