Panasonic Lumix GX8 - Manual (Page 330)

11. Using the Wi-Fi/NFC Function
330
[Wi-Fi Setup] Menu
Configure the settings required for the Wi-Fi function.
The settings cannot be changed when connected to Wi-Fi.
Select the menu. (P63)
• When [ON] is selected, you can also set up a connection by scanning a QR code. (P293)
• Refer to P319 for details.
• For details on how to enter characters, refer to “ Entering Text ” section on P84 .
• If you are using the PC with standard settings, you do not need to change the workgroup.
> [Setup] > [Wi-Fi] > [Wi-Fi Setup] > Desired item to be set
[Wi-Fi Password]
You can improve security by enabling password entry for a direct
connection to a smartphone.
[ON]:
Connects the camera and a smartphone using an SSID and
password.
(P291)
[OFF]:
Connects the camera and a smartphone using an SSID.
(P290)
[LUMIX CLUB] Acquires or changes the “LUMIX CLUB” login ID.
[PC Connection]
You can set the workgroup.
To send images to a PC, a connection to the same workgroup as
the destination PC is required.
(The default setting is “WORKGROUP”.)
[Change Workgroup Name]:
Enter the workgroup of the connecting PC.
[Restore to Default]:
Restores the default state.
[Device Name]
You can change the name (SSID) of this unit.
1
Press [DISP.].
2
Enter the desired device name.
•
For details on how to enter characters, refer to “ Entering Text ”
section on P84 .
• A maximum of 32 characters can be entered.
MENU