Paradyne 4200 - Manual (Page 135)

4200-A2-GB20-00 August 2002 6-1
6
Cross Connect Commands
Overview
This chapter contains the following CrossConnect commands:
T DLT-CRS-VC on page 6-2
T ED-CRS-VC on page 6-4
T ENT-CRS-VC on page 6-7
T RTRV-CRS-VC on page 6-10
Cross-Connection Defaults
The default uplink cross connections start with VPI = 2, VCI = 32 for Port 1 and
increments one VCI for each subsequent port. For example, Port 2 cross
connection is VPI = 2, VCI = 33, and Port 3 cross connection is VPI = 2, VCI = 34,
and so on. The default uplink for inband management for the ATM-1 interface is
VPI = 0, VCI = 33, and for the ATM-2 interface is VPI = 0, VCI = 33.