Paradyne 4200 - Manual (Page 218)

10. Fault Commands
10-26 August 2002 4200-A2-GB20-00
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response will be sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* RTRV-ATTR-T1:[tid]:aidall_t1:[ctag]::[ntfncde],
[cond_dsl1],[locn],[dirn] */
"aidall_adsl,aid_type:ntfncde,cond_t1,[locn],[dirn]"
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/*
RTRV-ATTR-T1:[tid]:aidall_t1:[ctag]::[ntfncde],[cond_adsl],
[locn],[dirn] */
errcde
;
Table 10-16. RTRV-ATTR-T1 Response Parameters (1 of 2)
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see Appendix A, Error Codes )
aidall_t1 As described for command parameters (see Table 10-15,
RTRV-ATTR-T1 Command Parameters ), except that ALL is not used.
aid_type The type of Access Identifier. The value is T1.
ntfncde As described for command parameters (see Table 10-15,
RTRV-ATTR-T1 Command Parameters ), except that ALL is not used.
cond_ds1 As described for command parameters (see Table 10-15,
RTRV-ATTR-T1 Command Parameters ).