Paradyne 4200 - Manual (Page 334)

C. Traps and MIBs
C-10 August 2002 4200-A2-GB20-00
ifAdminStatus
( ifEntry 7)
Specifies the desired state
(configuration) of the interface. Upon initialization, all interfaces start with down(2).
As a result of either management action or
configuration, status is changed to up (1). Values
that can be assigned for each interface after
initialization are Up(1), Down(2), or Testing(3.
ifOperStatus
( ifEntry 8)
Specifies the current operational
state of the interface. Values that can be assigned for each interface are
Up(1), Down(2), Testing(3), Unknown(4),
notPresent(6), or lowerLayerDown(7)
ifLastChange
( ifEntry 9)
Indicates the amount of time the
interface has been up and
running. Contains the value of sysUpTime object at the time
the interface entered its current operational state.
ifInOctets
(ifEntry 10)
Input Counter objects that collect
input statistics on data received by
the interface. T DSL1
−
24 interface: Number of octets received.
T ATM1
−
24 interface: Number of cells received
multiplied by 53.
T ATM90 interface: Number of cells received
multiplied by 53.
T ATM91 interface: Number of cells received
multiplied by 53.
T AAL5 interface: Number of cells received CPCS
PDU octets.
T RFC1483 interface: Number of cells received
CPCS PDU octets.
ifInUcastPkts
ifEntry 11)
T DSL1
−
24 interface: 0
T ATM1
−
24 interface: 0
T ATM90 interface: 0
T ATM91 interface: 0
T AAL5 interface: PDUs inbound is the number of
AAL5 CPCS PDUs passed to a higher layer.
T RFC1483 interface: 0
ifInUcastPkts
ifEntry 12)
0
ifInDiscards
(ifEntry 13)
T DSL1
−
24 interface: Number of octets received for
discard
T ATM1
−
24 interface: 0
T ATM90 interface: 0
T ATM91 interface: 0
T AAL5 interface: Number of AAL5 CPCS PDUs
discarded.
T RFC1483 interface: 0
Table C-3. Interfaces Group Objects (2 of 3)
Object Description Setting/Contents