Snmp traps – Paradyne 4200 User Manual
Page 326
C. Traps and MIBs
C-2
August 2002
4200-A2-GB20-00
SNMP Traps
, lists the traps supported by the GranDSLAM 4200.
Table C-1.
SNMP Traps (1 of 3)
Trap Event (Trap #)
Description
Variable Binding
Standard Traps
authenticationFailure (5)
The authenticationFailure trap signifies that the
unit, acting in an agent role, has received a
protocol message that has not been properly
authenticated. The snmpEnableAuthenTraps
object indicates whether this trap will be
generated.
ifIndex (RFC 2863)
ifAdminStatus (RFC 2863)
ifOperStatus (RFC 2863)
linkDown(3)
The unit has recognized a failure in one of the
communication interfaces.
ifIndex (RFC 2863)
ifAdminStatus (RFC 2863)
ifOperStatus (RFC 2863)
linkUp(4)
The unit has recognized that one of the
communication interfaces has come up.
ifIndex (RFC 2863)
ifAdminStatus (RFC 2863)
ifOperStatus (RFC 2863)
DSX Traps
dsx1LineStatusChange (1)
Value of an instance dsx1LineStatus changes.
ifIndex (RFC 2863)
dsx1LineStatus
dsx1LineStatusLastChange
M4 Traps
atmM4IfLcdAlarm(2)
LCD (Loss of Cell Delineation) has occurred.
ifIndex (RFC 2863)
ifOperStatus (RFC 2863)
atmfM4TrapAlarmSeverity
atmM4IfLosAlarm(5)
LOS (Loss of Signal) has occurred.
ifIndex (RFC 2863)
ifOperStatus (RFC 2863)
atmfM4TrapAlarmSeverity
Enterprise-Specific Traps
devConfigRestoreFailEvent(3)
Automated backup of a device’s configuration
at the scheduled time is prevented.
entPhysicalIndex
devAutoBackupFail Event(2)
Sent by a unit to indicate that the download of
an incorrect or incompatible configuration file to
the unit was attempted.
entPhysicalIndex
pdnAtmIfConfExtLineRateAlarm
Clear(102)
The configuration has changed so that the
previously invalid CAC contracts can be
guaranteed in the egress direction.
ifIndex (of ATM link)
pdnAtmIfConfExtLineRateAlarm
Set(2)
The configuration has changed so that the
previously valid CAC contracts can no longer
be guaranteed in the egress direction.
ifIndex (of ATM link)