Paradyne 4200 - Manual (Page 72)

3. ADSL Facility Commands
3-36 August 2002 4200-A2-GB20-00
Example
Retrieve ATU-R configuration data for rack 1, shelf 1, slot 1, circuit 9.
RTRV-ATUR:TAMPA:ATUR-1-1-1-9:42::::;
TAMPA 02-03-24 12:30:43
M 42 COMPLD
/* RTRV-ATUR:TAMPA:ATUR-1-1-1-9:42:::: */
ATUR-1-1-1-9,R1.01:01
;
Related Commands
None
Table 3-28. RTRV-ATUR Response Parameters
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see Appendix A, Error Codes )
aid_atur As described for command parameters (see Table 3-27, RTRV-ATUR
Command Parameters ), except that ALL is not used
adsl_nblk Named parameter block for ADSL line. The block consists the following
parameter and a valid value.
CURSWER: Installed version of software (1
−
32 characters). If
equipment is not installed or no software is available, no value is shown.