Paradyne 4200 - Manual (Page 329)

C. Traps and MIBs
4200-A2-GB20-00 August 2002 C-5
MIBs Overview
The GranDSLAM 4200 DSL system supports standard as well as Paradyne
Enterprise MIBs. Various configuration, status, and statistical data within the
SNMP agent is accessible from the NMS. The content of an SNMP agent’s MIBs is
defined by various Internet Request for Comments (RFC) documents.
The following sections provide brief descriptions about supported MIBs. Complete,
up-to-date details about the content of all DSL MIBs are available on the Paradyne
Web site at
www.paradyne.com . Select Technical Support
→
Online Support
→
MIBs .
Standard MIBs
Standard MIBs supported consist of the following:
T MIB II (RFC 1907)
— System Group
— Interfaces Group
— IP Group
— ICMP Group
— TCP Group
— UDP Group
— SNMP Group
T MIB II (RFC 1213)
— System Group
— IP Group
— SNMP Group
T MIB II (RFC 2863)
— Evolution of the Interfaces Group of MIB II
— Extension to the Interfaces Table (ifXTable)
— Interface Stack Group
— Interface Test Table
— ifTestEntry Table
T ATM MIB (AtoM) (RFC 2515)
— ATM Interface Configuration Parameter Group
— ATM Traffic Descriptor Group
— ATM Virtual Channel Link (VCL) Configuration Group
— Virtual Channel (VC) Cross Connect Group