Paradyne 4200 - Manual (Page 206)

10. Fault Commands
10-14 August 2002 4200-A2-GB20-00
Example
Retrieve service-affecting critical alarms for NTT-1.
RTRV-ALM-T1:TAMPA:NTT-1:42::CR,,SA;
TAMPA 02-04-20 10:30:23
M 42 COMPLD
/* RTRV-ALM-T1:TAMPA:NTT-1:42::CR::SA */
"NTT-1,T1:CR,LOS,SA,,,NEND,RCV,:Loss of Signal/Clock"
;
Related Commands
None
cond_ds1 DS1 facility condition. Values are:
AIS: Alarm Indication Signal
LCD: Loss of ATM Cell Delineation
LOF: Loss of Framing
LOS: Loss of Signal/clock
RAI: Remote Alarm Indication
serveff As described for command parameters (see Table 10-7, RTRV-ALM-T1
Command Parameters ), except that ALL is not used.
[locn] Location of the condition. Valid value is NEND (Near end).
[dirn] Direction of the condition. Valid value is RCV (Receive).
[cond_descr] Description of alarm condition.
Table 10-8. RTRV-ALM-T1 Response Parameters (2 of 2)
Parameter Explanation