Paradyne 4200 - Manual (Page 303)

15. Test Commands
4200-A2-GB20-00 August 2002 15-5
Response Format
If, in less than 2 seconds, a normal or error response cannot be sent, the following
acknowledgment response is sent:
IP c
After the above response, a new command input may be generated.
Normal Response:
sid yy-mm-dd hh:mm:ss
M c COMPLD
/* OPR-LPBK-VCL:[tid]:lpbk_vcl:[ctag]::[locn],[orgn] */
"aid_vcl:op_vcl,value"
;
Error Response:
sid yy-mm-dd hh:mm:ss
M c DENY
/* OPR-LPBK-VCL:[tid]:lpbk_vcl:[ctag]::[locn],[orgn] */
"aid:ERRCDE=errcde"
/* error description */
;
Table 15-4. OPR-LPBK-VCL Response Parameters
Parameter Explanation
tid Target NE identification
yy-mm-dd Year, month, and day
hh:mm:ss Hour, minute, and second
M Message generated in response to an input command
c If provided, ctag; otherwise 0
COMPLD Completed
DENY Input command is denied
/* */ Enclosed are human readable comments – unspecified format
errcde Error code (see Appendix A, Error Codes )